SilencerCo Hybrid 46 DTM

SilencerCo Hybrid 46 DTM Details

The SilencerCo Hybrid 46 DTM is a full-auto and magnum-rated multi-caliber suppressor built from 17-4 stainless steel and Grade 9 titanium, designed to run on pistols, rifles, and submachine guns across an exceptionally wide caliber range. It covers pistol calibers from 9mm through .45 ACP and rifle calibers from 5.56 NATO through .45-70 Government, with magnum ratings up to .338 Lapua Magnum on barrels 18 inches or longer. It measures 7.61 inches in length, 1.57 inches in diameter, and weighs 14.1 oz. The Hybrid 46 DT ships with a 5/8x24 Bravo Direct Thread Mount, Bravo Spanner Wrench, and Bravo Multi-Tool installed and ready to run.

Features & Benefits

• Multi-caliber coverage from 9mm and .45 ACP to 5.56 NATO, .308 WIN, .45-70 GOV, and .338 Lapua Magnum — one suppressor for every platform in your safe
• Full-auto rated across its supported caliber range
• Magnum rated up to .338 Lapua Magnum with minimum 18-inch barrel
• Rated down to 16-inch barrels for .45-70 GOV and .458 SOCOM
• Compatible with pistols, rifles, and submachine guns via Bravo system accessories
• Bravo rear threading enables five mounting configurations: Direct Thread (included), ASR quick-attach/detach, Piston Mount for threaded pistol barrels, 3-Lug for sub-gun and HK-pattern hosts.
• Ships with 5/8x24 Bravo Direct Thread Mount installed; converting to ASR or other Bravo mounts requires the separately purchased Bravo ASR Mount or compatible accessory
• Built from 17-4 stainless steel and Grade 9 titanium for durability across hard-use rifle and pistol applications
• Limited Lifetime Warranty from SilencerCo, registered to the original purchaser

Mounting System

The Hybrid 46 DTM ships with the Bravo Direct Thread Mount (5/8x24) installed. The Bravo rear system supports the following additional mount configurations, all available separately:

• Bravo ASR Mount for quick-attach/detach capability on rifles
• Bravo Piston Mount for use on threaded pistol barrels
• 3-Lug Mount for sub-gun and HK-pattern hosts (use 9mm 3-Lug muzzle devices with 9mm 3-Lug mounts, and .45 devices with .45 mounts — do not mix)
• Bravo Thread Over Mount (TOM) for thread-over pistol applications
• For ASR installation, use the shim kit for muzzle brake indexing. Crush washers are not compatible with the ASR mount and will cause baffle strikes. Muzzle devices should be tightened to approximately 20-30 ft-lbs against a 90-degree barrel shoulder.

Barrel Minimums

• .45-70 GOV and .458 SOCOM: 16-inch minimum
• Magnum calibers up to .338 Lapua Magnum: 18-inch minimum
• Additional caliber-specific minimums: refer to SilencerCo's published guidance for 5.56, .308, and pistol calibers

What's in the box

• Hybrid 46 DTM suppressor

• Bravo Direct Thread Mount (5/8x24)

• Bravo Spanner Wrench

• Bravo Multi-Tool

• Field Manual

Maintenance

The Hybrid 46 DT requires limited maintenance. Mounts and mounting surfaces should be periodically cleaned with standard gun cleaning solvent and a brush to remove carbon and fouling. Internal volume cleaning is not necessary — SilencerCo describes the internal baffle structure as functionally similar to a car muffler. Do not run cleaning patches through the bore, as patches can become lodged and cause damage upon firing. Use adequate ventilation and appropriate skin and eye protection when using solvents.

Specifications

SilencerCo builds to tight tolerances. Here's exactly what you're getting.

• Calibers: Pistol — 9mm to .45 ACP; Rifle — 5.56 NATO to .45-70 GOV; Magnum-rated to .338 Lapua Magnum (18" minimum barrel)
• Minimum Barrel Length: 16" for .45-70 GOV and .458 SOCOM; 18" for magnums to .338 Lapua Magnum
• Length: 7.61"
• Diameter: 1.57"
• Weight: 14.1 oz
• Materials: 17-4 stainless steel and Grade 9 titanium
• Mount System: Bravo (Direct Thread 5/8x24 included; ASR, Piston, 3-Lug, and TOM compatible via separate accessories)
• Full-Auto Rated: Yes
• Magnum Rated: Yes, to .338 Lapua Magnum
• Warranty: Limited Lifetime Warranty (original registered purchaser)

Ready to start the suppressor buying process? Learn how it works at Silencer Shop — from NFA paperwork to delivery — on our how to buy a silencer page.

Frequently Asked Questions

What calibers is the SilencerCo Hybrid 46 DTM compatible with?

The SilencerCo Hybrid 46 DTM covers pistol calibers from 9mm through .45 ACP and rifle calibers from 5.56 NATO through .45-70 GOV. It is also magnum-rated for calibers up to .338 Lapua Magnum with a minimum 18-inch barrel, and rated down to 16-inch barrels for .45-70 GOV and .458 SOCOM.

What is the difference between the SilencerCo Hybrid 46 DTM and the SilencerCo Hybrid 46?

The SilencerCo Hybrid 46 DTM is the direct-thread variant of the Hybrid 46 platform. It ships with the Bravo Direct Thread Mount installed rather than the ASR quick-detach mount used on the standard Hybrid 46. Both share the same baffle core, materials, caliber coverage, and Bravo rear threading, meaning either can be upgraded to ASR or other Bravo mounts via separately purchased accessories.

What mounts are compatible with the SilencerCo Hybrid 46 DTM?

The Hybrid 46 DTM uses the Bravo rear threading pattern and supports five mounting systems via separately purchased accessories: Bravo Direct Thread (5/8x24, included), Bravo ASR Mount for quick-attach rifle use, Bravo Piston Mount for threaded pistol barrels, 3-Lug Mount for sub-gun and HK-pattern hosts, and the Bravo Thread Over Mount (TOM). This makes the Hybrid 46 DTM one of the most mount-versatile suppressors in its class.

What are the specs of the SilencerCo Hybrid 46 DTM?

The SilencerCo Hybrid 46 DTM measures 7.61 inches in length, 1.57 inches in diameter, and weighs 14.1 oz. It is built from 17-4 stainless steel and Grade 9 titanium. The Hybrid 46 DTM is full-auto rated and magnum-rated to .338 Lapua Magnum.

Is the SilencerCo Hybrid 46 DTM full-auto rated?

Yes. The SilencerCo Hybrid 46 DTM is full-auto rated across its supported caliber range.

Can I use the SilencerCo Hybrid 46 DTM on a pistol?

Yes. The Hybrid 46 DTM is compatible with pistol calibers from 9mm through .45 ACP. For use on a threaded pistol barrel, you will need the separately purchased Bravo Piston Mount. For sub-gun or HK-pattern hosts, a compatible 3-Lug Mount is available. Always use caliber-matched muzzle devices with their corresponding 3-Lug mounts.

Can I use the SilencerCo Hybrid 46 DTM with big-bore rifles?

Yes. The Hybrid 46 DTM is rated for .45-70 GOV and .458 SOCOM with a minimum 16-inch barrel, and for magnum calibers up to .338 Lapua Magnum with a minimum 18-inch barrel. It is one of the few suppressors on the market that can transition from a 9mm pistol to a .338 Lapua Magnum bolt gun using a single NFA item.

What is the warranty on the SilencerCo Hybrid 46 DTM?

SilencerCo covers the Hybrid 46 DTM with a Limited Lifetime Warranty for the original registered purchaser. The warranty covers defects in materials and workmanship for the product's intended use. It does not cover abuse, improper maintenance, use of unjacketed lead ammunition, or modifications. Registration is required to activate the warranty.

How do I maintain the SilencerCo Hybrid 46 DTM?

The Hybrid 46 DTM requires minimal maintenance. Periodically clean mounts and mounting surfaces with standard gun cleaning solvent and a brush to remove carbon and fouling. Internal baffle cleaning is not necessary. Do not run cleaning patches through the bore, as they can become lodged inside and cause damage when fired. Always use adequate ventilation and protective equipment when working with solvents.