HUXWRX Flow 762 Ti Suppressor

The HUXWRX Flow 762 Ti solves the problem many .30 cal suppressors create: gas blowback. Flow-Through Technology vents combustion gases forward instead of pushing them back into the action, so AR-10s, AK variants, and piston guns keep running clean without gas adjustments. At 6.7 inches and 11.8 ounces of 3D printed Grade 5 titanium, it stays light enough for hunting rifles and carbines, with no barrel length restrictions.

Features & Benefits

• Flow-Through design vents gas forward for minimal blowback and near-zero added backpressure
• 3D printed Grade 5 titanium keeps weight to 11.8 ounces at 6.7 inches long
• Handles 5.56, 6.5, and 7.62 hosts, including .308 Win and 300 BLK, with no barrel restrictions
• Torque lock QD mounting on a 5/8x24 muzzle device holds zero under rapid fire
• Full-auto rated and backed by the HUXWRX limited lifetime warranty

Running one can across a .308 bolt gun and a 5.56 carbine? Compare it against the Flow 556 Ti, or browse all 30 cal suppressors to see how the Flow 762 Ti stacks up.

Silencer Shop handles the entire NFA process from cart to pick up, either on a 4473 or Form 4; see how to buy a silencer to walk through the steps

Frequently Asked Questions

Does the Flow 762 Ti have barrel length restrictions?

No. The Flow 762 Ti has no barrel length restrictions and is full-auto rated, so it runs on everything from short-barreled rifles to full-length bolt guns. It also passes 6 cycles of the SOCOM Reliability Stress Test.

What calibers can it run?

The Flow 762 Ti is a multi-caliber .30 cal suppressor rated for 5.56, 6mm, 6.5, 7mm, 7.62, .308, .30-06, .300 Win Mag, and .300 PRC.

What mounts does it use?

The Flow 762 Ti mounts on HUXWRX QD muzzle devices and is compatible with the Muzzle Brake-QD 762, Flash Hider-QD 762, Flash Hider-QD AK (762), and Comp-QD 762. HUXWRX's listed kit pricing includes a 5/8x24 Muzzle Brake-QD 762. Its Torque Lock system uses the rotational force of exiting gases to keep the suppressor tight on the mount, and no modifications to your rifle or gas system are needed beyond installing the QD muzzle device.

How does Flow-Through reduce gas blowback?

Traditional baffle suppressors trap expanding gas, which pushes pressure back down the bore and into the action and the shooter's face. HUXWRX's patented Flow-Through design instead redirects that gas in a helical path away from the bore line and out the front of the suppressor. That keeps bolt velocity within about 4% of an unsuppressed rifle with the Flash Hider-QD 762, so your rifle cycles normally, runs cleaner, and sends far less toxic gas toward your eyes and lungs without needing an adjustable gas block.