SilencerCo Scythe Ti Black

SilencerCo Scythe-Ti Details

The SilencerCo Scythe-Ti is an all-titanium .30 caliber suppressor built to go where heavy cans can't. At 7.3 oz with the included Single-Port Anchor Brake, and measuring 6.16" long, it is among the lightest .30 caliber suppressors in its class. This Black finish variant is a Silencer Shop exclusive colorway — it is not available in black on SilencerCo.com's standard retail channel. Caliber compatibility spans .223 Rem/5.56 NATO through .300 RUM with no barrel length restrictions. The Scythe-Ti is bolt-gun and semi-auto rated; it is not rated for full-auto fire. It uses the Bravo mounting platform and is compatible with direct thread, ASR, and TOM mounting options. It ships with a 5/8x24 titanium direct thread mount and a .30 cal aluminum Single-Port Anchor Brake.

FEATURES & BENEFITS

• Built entirely from Grade 5 and Grade 9 titanium — SilencerCo's first all-titanium centerfire rifle suppressor
• 7.3 oz total weight with the Single-Port Anchor Brake; 6.16" total length — designed for minimal impact on the host rifle
• 1.73" outer diameter
• Type 2 Anodized finish in black; Silencer Shop exclusive colorway not available in this finish on SilencerCo's standard retail channel
• Caliber compatibility: .223 Rem/5.56 NATO through .300 RUM, including 300 BLK, .308 WIN, 6.5 Creedmoor, and .300 Win Mag
• No barrel length restrictions
• Bolt-gun and semi-auto rated; not rated for full-auto fire
• Bravo mounting platform supports three options: direct thread, ASR quick-attach, and TOM (Thread Over Mounting)
• Single-Port Anchor Brake reduces recoil and maintains minimum total length
• Do not use unjacketed lead projectiles; the Scythe-Ti is a sealed suppressor
• Limited Lifetime Warranty backed by SilencerCo, extending to the original registered purchaser

SilencerCo Scythe-Ti Specifications

SilencerCo builds to exacting standards. Here's exactly what you're getting.

• Caliber: .223 Rem/5.56 NATO through .300 RUM
• Length: 6.16" (with Single-Port Anchor Brake)
• Weight: 7.3 oz (with Single-Port Anchor Brake)
• Diameter: 1.73"
• Materials: Grade 5 Titanium and Grade 9 Titanium
• Finish: Black (Silencer Shop exclusive; confirm finish spec before publishing)
• Mounting Systems: Bravo direct thread, Bravo ASR, Bravo TOM
• Barrel Restrictions: None
• Full-Auto Rated: No — bolt-gun and semi-auto only
• Warranty: Limited Lifetime Warranty (original registered purchaser)

Mounting System Overview

The Scythe-Ti uses the SilencerCo Bravo mounting platform. Three options are supported. Direct thread mounting uses the included 5/8x24 titanium Bravo Direct Thread Mount — thread by hand and tighten with the included Bravo Multitool. The Bravo ASR (Active Spring Retention) Mount enables quick-attach/detach via a secondary locking collar and requires a compatible Bravo ASR muzzle device. The TOM (Thread Over Mounting) system threads the suppressor over a TOMD-equipped host. The Single-Port Anchor Brake threads directly into the front of the suppressor and must always be installed before firing — firing the Scythe without the Anchor Brake or a SilencerCo front cap will void the warranty.

For a full walkthrough of the suppressor buying process, see our guide on how to buy a suppressor.

WHAT’S IN THE BOX

• SilencerCo Scythe-Ti suppressor (Black finish)
• Bravo Single-Port Anchor Brake (.30 cal aluminum)
• Bravo Titanium Direct Thread Mount (5/8x24)
• Radial Tool
• Bravo Tool
• Basic Tool
• Field Manual

Maintenance Notes

The Scythe-Ti requires limited maintenance. Mounts and mounting surfaces should be cleaned periodically with standard gun solvent to remove carbon fouling. A cleaning brush can be run through the bore to remove light fouling — do not run cleaning patches through the bore. For the exterior finish, SilencerCo recommends Kwikseal Firearm Lubricant and Rust Preventive Oil with a microfiber towel. Avoid chlorine and acetone products on the Scythe. Do not use excessive rapid fire with the Scythe-Ti — titanium is rated to 800 degrees Fahrenheit, and sustained rapid fire can damage the material.

Frequently Asked Questions

What is the SilencerCo Scythe-Ti Black?

The SilencerCo Scythe-Ti Black is an all-titanium .30 caliber suppressor offered exclusively in black through Silencer Shop. The Scythe-Ti is SilencerCo's first suppressor built entirely from titanium, weighing 7.3 oz with the included Single-Port Anchor Brake and measuring 6.16" long. The black finish is not available in this colorway through SilencerCo's standard retail channel.

What calibers is the Scythe-Ti compatible with?

The SilencerCo Scythe-Ti handles calibers from .223 Rem/5.56 NATO up through .300 RUM, including 300 BLK, .308 WIN, 6.5 Creedmoor, .300 Win Mag, and other calibers in that range. There are no barrel length restrictions.

Is the Scythe-Ti full-auto rated?

No. The SilencerCo Scythe-Ti is bolt-gun and semi-auto rated only. It is not rated for full-auto fire. Excessive rapid fire is also not recommended, as titanium is only rated to handle 800 degrees Fahrenheit and sustained high rates of fire can damage the material.

How much does the Scythe-Ti weigh?

The SilencerCo Scythe-Ti weighs 7.3 oz with the included Single-Port Anchor Brake and measures 6.16" in total length. These specs are measured with the Anchor Brake installed, which must be present any time the suppressor is fired.

What mounting systems does the Scythe-Ti use?

The SilencerCo Scythe-Ti uses the Bravo mounting platform and is compatible with three options: Bravo direct thread, Bravo ASR quick-attach, and Bravo TOM (Thread Over Mounting). The suppressor ships with a 5/8x24 titanium Bravo Direct Thread Mount. ASR and TOM mounts are sold separately.

What does the Scythe-Ti ship with?

The SilencerCo Scythe-Ti ships with the suppressor body, a .30 cal aluminum Single-Port Anchor Brake, a Bravo Titanium Direct Thread Mount in 5/8x24, a Radial Tool, a Bravo Tool, a Basic Tool, and the SilencerCo field manual.

Why does the Scythe-Ti need an Anchor Brake?

The SilencerCo Single-Port Anchor Brake threads into the front of the Scythe-Ti and must be installed before firing. Firing the Scythe without the Anchor Brake or a SilencerCo-approved front cap will negate suppression performance and void the warranty. The Anchor Brake also reduces felt recoil and maintains the suppressor's minimum overall length.

What is the warranty on the SilencerCo Scythe-Ti?

The SilencerCo Scythe-Ti is backed by a Limited Lifetime Warranty extending to the original registered purchaser. SilencerCo will repair or replace the suppressor at no charge (excluding shipping) under covered conditions. Register at silencerco.com/register.