Product was successfully added to your shopping cart.


ALL ORDERS from Silencer Shop SHIP FREE and there are NO TRANSFER FEES!

Sig Sauer SRD762 QD




Get a SRD22X for $99 with the purchase of this silencer between 2/20/18 and 2/23/18.  Offer valid while supplies last. No substitutions.


When Sig Sauer Silencers released their SRD-series rifle suppressors, they definitely caught our attention!

Sig SRD Silencer Comparison

Unlike previous suppressors from Sig, the SRD models are some of the most accurate and best performing suppressors on the market - due to multiple innovative design concepts that Sig is pioneering.

The single-tube design allows for additional internal volume; while maintaining, or exceeding, the strength of traditional 2-tube designs.  As a direct result of the additional volume, the SRD suppressors are some of the quietest suppressors we've used - while having exceptionally low blow-back in semi-automatic weapons!

Sig has a reputation for precision manufacturing - and that experience has allowed them to use very tight tolerances, which equate directly to increased accuracy and reduced Point Of Impact shift.

If there is damage to the front of the suppressor, or any of the internal baffles, the SRD can be easily repaired because the rear section is the only serialized partTake a look at this photo of an SRD suppressor, in the middle, compared to traditional suppressor designs:

  1. Porting allows the SRD suppressors to efficiently use the internal volume - which directly equates to a quieter design

  2. The single tube design is lighter, quieter, and just as strong - by using Sig's precision welding

After shooting the SRD series suppressors, I think it should be on the comparison list for anybody looking at a new rifle suppressor.

What are the Critics Saying?

Additional Commentary

The SRD762 QD is a Stainless Steel/Nickel alloy based silencer that use QD (Quick Disconnect) muzzle devices to attach the silencer to the rifle. Stainless/Nickel alloy silencers provide the highest level of durability, particularly with Short Barreled hosts using SuperSonic ammunition. The 7.62mm QD muzzle device system is available in 5/8”-24tpi threads match the vast majority of modern sporting rifles in .308/7.62mm on the market today. The rear mount has wrench flats to torque the silencer to the barrel. There is a secondary retention latch that is depressed to remove the silencer from the QD mount.

The SRD762 QD is rated up too 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x35 (300 Blackout) 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges. The SRD762 QD comes with one 5/8”-24tpi "Taper-Lok" Muzzle Brake.


Specification Information

Caliber Rating 7.62x39, 7.62mm (.30 Caliber - up to .300WM)
Color Black
Length 7"
Diameter 1.625"
Weight 17 oz
Full-Auto Rated Full-Auto Rated
Manufacturer SIG SAUER Silencers



4 Reviews For Sig Sauer SRD762 QD

  • Varifleman 1/8/2018

    Just received this last week and took it for a session on 5.56 and .308. Amazingly quiet in both calibers. Well built and way to install. Having extra muzzle devices are a must if you desire multiple hosts. I expect this will provide a long service life
    Thank you silencer shop for making this easy!

  • Jeffrey10/10/2017

    I followed the easy steps and great directions provided by The Silencer Shop. I had my silencer in 250 days from start to finish. I chose this one to put on a Varmint grade 22/250 and the results were unbelievable. For some unknown reason it did not work well on a Mini 14 chambered for 223.
    I enjoyed the process so much that I ordered the Yankee Hill stinger for the 22. SInce it was less than a year since this purchase, I did not have to resubmit fingerprints or the picture again. The Silencer Shop had all paperwork approved and sent within 24 hours on the Feds. On this one, it was 10 days to get to where I am now on the second one in one day. I am hoping it does not take 250 days this time. It will be fine if it does though.

  • GH ARMS LLC10/6/2017

    I have used this with 7.62x39, 6.5 creedmoor, 5.56 and on a little 10/22. It does a fantastic job compared to my others that cost nearly twice as much. To my ear, it does a better job suppressing .22 than does my dedicated .22 suppressor. This is an excellent bang (albeit a very quiet bang) for your buck.

  • CGP4/18/2017

    Very well made. QD connection works fine. I use this for two separate rifles, one AR in .300blk and one bolt in .308, bought one extra QD mount as it comes with one. Comes with basic nice case/flip open box.

    Very quiet in .300blk with Sig 220 grain match grade subsonic. No hearing protection required and once the rifle was dialed in, it held zero. The only noise I could hear was the mechanics of the AR as it cycled each cartridge/round and the plunk where the bullet hit the paper/backstop. Solid holes in paper, no tumbles from my combination of rifle and Sig ammunition.

    In the .308 I use supersonic, it stops the initial blast so the supersonic crack is really all I hear. I would advise to still wear the hearing protection with supersonic high powered cartridges. This is just a personal preference with several suppressor makers and .308 bolt rifle combination.

    I would recommend this product.

Add a review

Only registered users can write reviews. Please, log in or register


Sig Sauer SRD762 QD

The SRD762-QD is a Stainless Steel/Inconel, Quick-Attach silencer that will hold up to high volume fire from a short barrel weapon

Availability: In stock





Please select a dealer in your area

Select Your Pickup Location

Prices include all transfer fees.

You May Also Like
In stock
Form 4 Tax Stamp
In stock
NFA Gun Trust
In stock
Sig Sauer SRD Flash Hiders
The easiest way to buy silencers, period.