CGS SCI-SIX

IN STOCK
SKU
CGS SCI Six
MSRP $1,129.00 $1,050.00

In stock

FREQUENTLY BOUGHT TOGETHER

  • Product Description

     

    The primary considerations during the development of CGS's SCI-Six Suppressor was gas, flash, and sound mitigation. CGS aimed to minimize the impact of adding a suppressor to a firearms operating system, minimize POI shift, and improve host firearm precision all while maintaining a minimal size envelope.

    CGS manufacturing process creates parts with higher strength than billet, forgings, castings, or MIM, and does so with increased material density within the parts. There are no welds meaning there are no welds to fail or warp which would normally cause concentricity problems along the length of the barrel. The monolithic core structure and lack of welds make CGS rifle silencers very strong and eliminates failures, concentricity problems, and QC issues.

    Utilizing the Hyperion VCD (Variable Core Diameter) design makes this silencer stronger than other comparative silencers by better controlling heat and pressure to prevent hot spots from forming. The first chamber is vented causing gas to flow forward and outward around the core allowing the gas to flow freely to lower pressure regions. Flow moving forward is vented around the first core section and is then reintroduced to the main flow further downstream. The exterior gas flowing around the cores also has an alternate path out of the suppressor through an array of peripheral vents in an optional vented front cap. These flow dynamics also help to reduce thermal signature as well as IR glow under night vision.

    The signature suppressor is retained on its muzzle device mount with a shallow taper joint interface which helps with retention as it provides much more grip than a square shoulder. Thanks to the additive manufacturing process, CGS was able to integrate new technologies into the SCI-SIX series. The much wider than average bore aperture and optional use of the peripheral vents combined assist with minimizing impact to host firearm as well as limiting toxic gases being blown back at the shooter's face through the ejection port and other regions. The wide bore also virtually eliminates the potential for baffle or end cap strikes. The suppressor core features a 1.5" hex feature and the front cap features a 7/8" hex feature which allows easy installation and removal of front caps. While strikes are virtually eliminated, the front caps are easily replaceable with a wrench without any negative effects in any aspect if the need for replacement due to a strike does arise.

    Technical Specifications:

    • Length: 5.9"
    • Diameter: 1.68"
    • Weight: 17.1oz
    • Material: 718 Inconel
    • Finish: DLC

    What's in the Box:

    • CGS SCI-Six Suppressor
    • 1/2X28 Muzzle Brake
    • Owners Manual
    More Information
    Manufacturer CGS
    Weight 17.1 oz
  • Product comparsion

    CGS SCI-SIX

    CGS SCI-SIX

    NFA Tax Stamp

    NFA Tax Stamp

    Single Shot NFA Gun Trust

    Single Shot NFA Gun Trust

    Rating
    Weight17.1 ozNANA
    Length5.9"NANA
    DiameterDiameter 1.69"NANA
    Caliber5.56mm (.223)NANA
    Caliber Rating5.56mm (.223)NANA
    ColorBlackNANA
    FinishCerakote™NANA
    Build MaterialInconel 718NANA
    Sound ReductionNANANA
    Mount StyleNANANA
    Thread PitchNANANA
    User ServiceableNANANA
    Full-Auto RatedNANANA
    Min 556 BarrelNANANA
    WarrantyNANANA
    Min 300Blk BarrelNANANA
    Min 762 BarrelNANANA
    Min Magnum BarrelNANANA
    Product Status
    IN STOCK
    IN STOCK
    IN STOCK
    View Product View Product View Product
  • Reviews