Dead Air Nomad TI XC Xeno

The Dead Air Nomad Ti XC Xeno pairs Dead Air's lightest .30 caliber suppressor with the Xeno quick-detach mounting system for shooters who want to move one can fast between multiple rifles without sacrificing performance. It ships ready to run with a Xeno adapter and a 5/8x24 Omni Brake, so you get a repeatable, tool-free lock-up and effective recoil and flash management out of the box.

The Nomad TI XC is the same award-winning platform: a Grade 5 titanium body weighing 7.4 oz bare (9.7 oz with the Xeno adapter), rated all the way to .300 RUM. Dead Air's enhanced two-stage coaxial baffle system, produced with additive manufacturing, uses pressure-harnessing structures to tame both low- and high-pressure rounds — delivering strength, precision, and sound suppression that defy how light this can is.

The Xeno interface is what sets this configuration apart. Mount a Xeno Omni Brake (or compatible Xeno muzzle device) on each host, and the Nomad Ti XC screws on and off in seconds with a consistent return to zero every time. Because it's built on the Dead Air HUB platform, you're never locked in — swap to direct thread or another HUB adapter whenever your setup changes.

Why choose the Xeno configuration:

• Quick-detach speed — tool-free on/off in seconds; ideal for running one suppressor across several rifles.
• Repeatable zero — the Xeno lock-up returns to point of impact reliably, shot after shot, host after host.
• Includes the Omni Brake — 5/8x24 muzzle brake in the box for recoil and flash control at the muzzle.
• Same ultralight titanium — 7.4 oz bare / 9.7 oz mounted, rated to .300 RUM.
• HUB modular — switch to direct thread or other mounts anytime; one can, many hosts.

Technical Specifications:

• Weight: 7.4 oz
• Weight with Mount: 9.7 oz
• Length: 7.03"
• Diameter: 1.76"
• Material: Grade 5 Titanium
• Finish: Cerakote (BLK or FDE); Raw Titanium Satin Bead Blasted (Silver)
• Barrel Restrictions: 12.5” supersonic (5.56 NATO), 6” subsonic (.300 BLK)

What's in the Box:

• Dead Air Nomad TI XC Suppressor
• Dead Air Xeno Adapter
• Dead Air Omni Brake 5/8X24
• Owners Manual

FAQ 

What is the Xeno mount on the Nomad Ti XC?

Xeno is Dead Air's quick-detach mounting system. You install a Xeno-compatible muzzle device (the included Omni Brake) on your host, and the suppressor locks on and off tool-free in seconds with a repeatable return to zero.

What comes with the Nomad Ti XC Xeno?

The suppressor, a Dead Air Xeno adapter, a 5/8x24 Omni Brake, and the owner's manual — everything you need to mount and run it on a 5/8x24 host.

How much does the Xeno configuration weigh?

The bare titanium body is 7.4 oz. With the Xeno adapter installed it weighs 9.7 oz, and overall length is 7.03".

Can I run the Nomad Ti XC Xeno on more than one rifle?

Yes — that's the point of Xeno. Add an Omni Brake (or compatible Xeno muzzle device) to each host and move the single suppressor between them quickly while maintaining zero.

Should I buy the Xeno or the Direct Thread version?

Choose Xeno if you want quick-detach speed and plan to share one can across multiple rifles. Choose direct thread if you want the lightest, simplest single-host setup. Both are HUB-compatible, so you can change mounts later.